I want to use the crib I had from my daughter. Right now it is a light wood, like pine, with a clear finish. I would love to make it a disstresses white. Anyone know how I could go about this? Due to the fact that there are a lot of "slats" I think I would have the best luck with a power sprayer. Should I primer first, sand? Can I use a power sprayer for primer? Do I have to seal it, can I use a power sprayer for that?
I just am unsure and being that it's a crib I want the safest bet, so I know the paint will "take" and not worry about chips and peeling. HELP!
Hey pink--yes my husband painted our crib. It was white when we bought it but we actually painted it black to match our armoire. I know that might sound weird, but it actually looks really cute and not "gothic" at all like my inlaws feared! Anyway, we did not prime it b/c it already had paint on it, so my husband just sanded it down a little and then painted over it. He didn't use a power sprayer but I just asked him about it and he said you probably could. Ours has slats too. Anyway, it was a pain and the paint didn't absorb really well so he had to do several coats. However, we are happy with the results and it saved us a lot of money--the only other black or really dark brown wood cribs we could find were very expensive, like over $500. Oh and we did not use a sealant on ours and everything has been fine so far! I'm sure that if you go to a paint store like Benjamin Moore (which is where we purchased ours), they can help you a little. HTH some and let me know if you have any questions!
i repainted a vintage crib several years ago. (well my father-in-law did it for me since i was pregnant and avoiding paint fumes)
he painted it by hand and did 2 coats (although a sprayer would have been quicker... and messier). we didn't seal it or put any topcoat on it and never had any problems with peeling or chipping.
So do you all feel it would be more difficult to paint the crib with the power sprayer? I just though it would simplify things and help get a nice even coat. Also I have been considering doing the crackel effect, if I do this I should cerainly use a topcoat/sealent right?
itsapinkthing wrote: So do you all feel it would be more difficult to paint the crib with the power sprayer? I just though it would simplify things and help get a nice even coat. Also I have been considering doing the crackel effect, if I do this I should cerainly use a topcoat/sealent right?
i don't know if it would be more difficult to do with a sprayer or not. i guess it depends on the person doing the work. if it were me doing the painting, i'd do it with a brush because that's what i'm most comfortable with. when i think sprayer, i think huge mess (overspray, drips, etc.)
i've never done a crackle treatment, so i don't know if a topcoat is required, but you could always do one coat to be sure.
sounds like a cute idea! i've never seen it done on a crib before so you'll have to post a picture when it's done.